Puffco Peak 3 Red Flashes (2024)

FAQs

Why is my Puffco peak blinking 3 times? ›

My Device Keeps Flashing White 3 Times. What do I do? Not to worry, this is simply an indication that your chamber is not attached. Please try removing the chamber from the base and reattaching.

The Light On My Device Sometimes Flashes Red While Charging, What Do I Do? Not to worry, this simply means that the device has overheated. Simply let the Peak cool down for a little while and normal functionality/charging will resume.

Multicolored light flash: When there is a poor or no connection between the base and atomizer, you'll see a rainbow light. 5 red light flashes: Indicates short circuit. Red light holds: Device overheated.

The rainbow light is an indication that there is a connection issue between the base and atomizer & does not necessarily mean that anything is broken or defective. The first tip is to remove the atomizer, clean the connection pins with a cotton swab dipped in iso and reattach the atomizer.

In fact, one of the most common reasons for 3 blinks is simply a low or dead vape battery that needs recharging. Many vapes use this blinking pattern to warn you the battery is running low before it dies completely. Three light flashes can also indicate that the charge isn't flowing to the cartridge.

A white light blinking three times on a vape pen signals a connection issue or low battery. Fix it by charging the battery and ensuring proper connections. Clean the cartridge and battery contact points, try a different cartridge, and consult the user manual or customer support if needed.

The Puffco Peak Pro coils are designed to last anywhere from 10-20 sessions, depending on how frequently they are used and temperature settings. To ensure that you get the most out of your coil, it's important to clean it regularly.

It's also worth noting that the Puffco Peak Pro features a pass-through charging capability, which means you can use the device while it's charging. This is a great feature for those who don't want to wait for the device to fully charge before using it again.

Atomizer can be cleaned by submerging fully assembled part in Isopropyl Alcohol (99% preferred). DO NOT RINSE WITH WATER, AS WATER EXPOSURE TO CERAMIC CAN POTENTIALLY DAMAGE THE PART. Be sure to clean the gold connector pin on the base and bottom of atomizer with Iso soaked cotton swab as well.

Triple-click to check battery level. Single click to toggle through heat settings. Blue (Low) - Green (Medium) RED (High) - White (Peak) Align inlet hole on the front of the glass with chamber. Carefully push the front of glass into the base, then push the back down.

Why is my Puffco plus blinking 3 times? ›

What do I do? This is simply an indication that your chamber is not attached.

This could be due to a low battery or dirty heating chamber or clogged air path. Make sure the device is fully charged, clean the heating chamber, and ensure that the air path is clear. Also, ensure that the device is heated to the proper temperature.

The Puffco Peak Pro has four built-in temperature settings. Blue is low at 254 degrees Celsius or 492 Fahrenheit, Green is medium at 266 degrees Celsius or 510 degrees Fahrenheit, Red is high at 277 Celsius or 530 Fahrenheit, and White is “Peak” at 285 Celsius or 545 degrees Fahrenheit.

My battery light just flashes when I try to use it, what should I do? This is usually the result of a connection issue. Sometimes even the smallest bit of debris can cause a bad connection which stops the pen from working at its full potential.

This could be due to a low battery or dirty heating chamber or clogged air path. Make sure the device is fully charged, clean the heating chamber, and ensure that the air path is clear. Also, ensure that the device is heated to the proper temperature.